We have the universal bumper mounted trailer hitch from Curt which is part # E-3S. It's not a confirmed fit for your 1990 Chevy C1500 but I attached a picture that shows it's mounting hole dimensions. view full answer...
For a 1993 Chevrolet C/K Series Stepside pickup we offer tonneau covers from Access, TruXedo, Extang and others that you can see on the linked page. These covers are available in several styles, covers that retract like the ReTrax # RT80404 and covers that roll up, like # A22020139 from Access.
You can use the filters on the page to select the style you prefer, the type (hard or soft) and the mounting location, either inside the bed rails or on top of the bed rails. view full answer...
We do indeed offer hitches that are compatible with a 1993 Chevy C/K Series with a roll pan bumper.
I'd recommend the Draw-Tite # 41522. This hitch is compatible UNLESS your truck has the heavy duty-suspension or is a 4 door crew cab. You'll need to cut a hole in the roll pan behind the license plate for the receiver to pass through the roll pan. . view full answer...
If your 2000 Chevrolet C3500 HD pickup has a tow package with a 7-way trailer connector and wiring already in place, then you can use Tekonsha adapter # 3025-P to connect the Prodigy P3 # 90195 to the under-dash connection port. The adapter harness you referenced, part # 3026-P, will not fit.
The linked photo and article show the connection port and the linked video details an example of the brake controller installation process.
If your truck does not have a factory-installed 7-way (but... view full answer...
We do have the regular Dexter Axle brakes and their Nev-R-Adjust equivalents.
The regular (manually adjusted) brakes that you are wanting are listed as part # 23-26 for the Left Hand side and part # 23-27 for the Right Hand side. Their Nev-R-Adjust equivalents are parts # 23-468 and # 23-469 respectively.
The Dexter Axle hub and drum assemblies that we have for a 3,500 lb axle use the Inner Bearing # L68149 and Outer Bearing # L44649. If you have a 5 on 4-1/2" bolt pattern then you want... view full answer...
You will need to start with a 4-way (if you do not have one). For that you would want the # 18252.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake... view full answer...
We do offer some light bars brackets for a 1995 Chevy C/K series from Carr that will accommodate light bars up to 50 inches long. For a sliver powder coated steel, use part # CARR210114 bar and the # CARR223412 mount kit, for polished stainless use part # CARR210112 for the bar and # CARR223412 for the mount or for black powder coated steel, go for part # CARR210111 for the bar and # CARR223411 for the mount. view full answer...
We do not manufacture/make the BlackMax covers. They are made by Extang and the replacement covers/tarps like the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1915 that you were looking at are provided to us from Extang as replacement parts.
If you are needing a replacement tarp/cover and you can let me know the model number of the cover that you have, I can see if we have the correct replacement or reach out to Extang to see if it is available. view full answer...
A front-mounted hitch sure does make life easier when its time to move your trailer around. For your 1994 Chevrolet C/K Series 1500 Pickup you can use Curt's front-mount hitch # 31042 for a no-drilling installation (as long as your frame does not measure 34-inches outside to outside). If you prefer a lower-cost option we offer the Draw-Tite # 65005. This does require some drilling and fascia trimming for installation and you'll need a license plate relocation bracket too, part # 5443. view full answer...
We do offer a tonneau cover for your 1968 Chevrolet C/K Series Pickup with 6-foot stepside bed.
Craftec offers a low-profile hatch-style cover, part # 251185, that features an aluminum frame and high-grade UV-resistant vinyl. This cover installs without drilling (the frame clamps on) and it is compatible with bed liners.
The Craftec cover lifts up from the tailgate as shown in the linked photo to provide you with easy access to your truck bed. view full answer...
You have a 2-3/8 inch O.D. pipe so you might want to look at #84 Spindle, # TRU84FR, which has a 2 inch O.D. at the weld point and has a 1750 lb. capacity, so two spindles will give that axle 3,500 lb capacity.
The #42 Spindle, TRU57FR which has a 2.25 inch O.D. at the weld point and is rated for 5,200 lbs to 7,000 lbs axles. The total capacities of the spindles are only valid if installed correctly and the axles are not broken or damaged in any way.
The TruRyde #84 Spindle, # TRU47FR,... view full answer...
We offer a number of aftermarket Fey bumpers for your 1985 Chevrolet C/K Series Pickup so long as it is NOT a flareside/stepside type bed. These appear on the page I linked for you and they include 3 chrome-finish models as well as silver and black bumpers too.
The chrome bumper parts we can offer you are:
Westin Fey Surestep Deluxe XLT # 21007-92230
Westin Fey Surestep Rear Bumper # 21002-92230
Westin Fey Diamondstep Rear Bumper # 21000-92230
All of these bumpers offer no-drill installation... view full answer...
Yes, we have an adapter that converts the 4 pole connector to a 6 and 4-way connector, it is Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter, part 37175. If your vehicle currently has 4 pole wiring it will work perfectly on your 1998 Chevrolet CK Series Pickup Truck.
If you do not have a 4-way connector on your vehicle you would need the Tow Ready Custom Fit Vehicle Wiring, part # 118315, that will plug directly to your factory wiring. view full answer...
The Thule Ladder Rack, part # TH500XT, will fit your 1998 Chevrolet Silverado 1500 with 6 foot bed. We have other ladder racks that will fit your 1998 Chevrolet Silverado and I have linked to a page that has all of them below. view full answer...
We do not carry a aftermarket spare tire repositioner that you may need to use when installing the Curt Trailer Hitch Receiver # 13942 on your 1989 Chevy C/K Pickup. view full answer...
I do have a solution for you. However, the Draw-Tite Class III hitch # 75129 is the only confirmed hitch that will fit a 1975 Chevrolet Blazer. There are no custom-fit Class IV or V hitches for this model vehicle.
The Curt Class V Universal Weld-On Receiver Hitch, # 15901, may be an option for your 1975 Blazer. The bracket can fit a frame that has a minimum width of 18 inches to a maximum of 44 inches. The mount brackets are welded to the frame. The side brackets will also provide a drop... view full answer...
The Putco Tailgate Cap - Stainless Steel # P51610P is a confirmed fit for your 1969 Chevy C/K pickup truck, and the price is shown on the product page. That said, there unfortunately is not a side rail cover available for your truck at this time. view full answer...
The capacity of the Pintle Hook Mount, # 63058, is 8,000 pounds maximum no matter how it is mounted. Any more weight on it than that could cause the unit to fail and would void the warranty.
We have a cushioned mount with 10 holes rated for 10,000 pounds, # AMPC3. I have included a link to a video review for you. There is also a 7-1/2 inch tall Tow Ready model, # 63059, rated for 12,000 pounds. These 2 options are going to get you the closest to the height of the 8K model with the capacity... view full answer...